Metals We Supply
Any alloy, any common form, cut to your size. Pick a material to see grades, sizes and cutting options, or send us the spec and we'll find it.
Materials
Shop by form
Sheet, plate, bar, tube, pipe and structural, each with sizes and cut options.
- Aluminum Sheet5052, 3003 and 6061 sheet, sheared or laser cut to your sizes and delivered across Texas.
- Aluminum Plate6061, 5052, 5083 and 7075 plate, precision sawn or waterjet cut into blanks and delivered.
- Aluminum Bar & Rod6061, 7075, 2011 and 2024 round, flat, square and hex bar, saw cut to your lengths.
- Aluminum Tube & Extrusions6061 and 6063 tube, angle, channel and beam, saw cut and mitered to your lengths.
- Aluminum Diamond Tread PlateBright 3003 and 6061 diamond tread plate, sheared or laser cut for floors, boxes and steps.
- Stainless Steel Sheet304 and 316 stainless sheet in 2B, #4, BA and mirror, sheared or laser cut to size.
- Stainless Steel Plate304/304L and 316/316L plate from 3/16 in up, plasma or waterjet cut to your drawing.
- Stainless Steel Bar303, 304, 316, 416 and 17-4 round, hex, square and flat bar, saw cut to length.
- Stainless Steel Tube & Pipe304 and 316 ornamental, sanitary and mechanical tube plus Sch 10/40/80 pipe, cut to length.
- Carbon Steel Plate (A36 / A572)A36 and A572-50 plate from 3/16 in up, plasma, oxy-fuel or laser cut to your drawing.
- Hot Rolled, Cold Rolled & Galvanized SheetHot rolled, P&O, cold rolled and G90 galvanized sheet, sheared, laser or plasma cut to size.
- Structural Steel: Angle, Channel, Beam & Flat BarAngle, channel, W and S beams and flat bar in A36 and A572-50, saw cut to length.
- Steel Square & Rectangular Tube (A500)A500 structural and A513 mechanical tube, 1/2" to 8"+, cut or mitered to your lengths.
- Steel PipeA53 and A106 pipe, sch 40 and 80, plus used oilfield pipe for ranch fencing.
- Cold Finish Steel Bar (1018, 1045, 12L14)Cold drawn 1018, 1045, 12L14 and 1144 rounds, flats, squares and hex, cut to blanks.
- Brass Rod (C360)C360 free-machining brass in round, hex and square, plus lead-free and naval brass, cut to length.
- Copper Sheet & Bus BarC110 and oxygen-free C101 copper sheet and bus bar, sheared, sawn or waterjet cut to size.
- Expanded Metal & GratingStandard and flattened expanded metal and welded bar grating, cut to your panel sizes.
Popular grades
- 6061 AluminumThe go-to machining and structural aluminum. Strong, weldable, anodizes clean.
- 5052 AluminumBends tight, welds clean, shrugs off salt water. The standard fabrication sheet.
- 3003 AluminumSoft, formable, weather-resistant sheet. The usual alloy behind bright diamond tread plate.
- 7075 AluminumNear-steel strength at aluminum weight. Machines beautifully; not a welding alloy.
- 304 Stainless SteelThe everyday stainless for food equipment, trim and general fab. Forms and welds well.
- 316 Stainless SteelMolybdenum-bearing stainless for salt water, coastal air and chemical service.
- A36 SteelThe standard structural steel for plate, angle and channel. Welds easily, cuts clean.
- 4140 Alloy SteelChromoly bar for shafts, pins and tooling. Annealed for machining or pre-hard ready to use.
Don't see it listed?
The pages here cover what most shops order. They aren't the limit. If it's a standard alloy in a standard form, we can usually source it: 5086 plate, 2205 duplex, 1144 bar, AR400, bronze bearing stock, titanium sheet. Send the grade, size and quantity on a quote request and we'll tell you what's available and what it takes to get it to you.